View FTP-637MCL601_4127919.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

24VdRiVEN,FTP-607Series 3"HigHSPEEdTHERMALPRiNTER
FTP-637MCL401/601
n Overview
The FTP-637 MCL Series are 24V driven high-speed printers with a ultra low profile auto cutter and long life. The FTP-637 MCL Series can be used for a variety of applications, such as POS terminals, ticket vending machines, label printers, banking terminals, and measurement and medical equipment.
n HiGHLiGHTS
* Ultralowprofile Height 21.8 mm, width 103.2/104.5 mm, depth 42.2 mm * Highspeedprinting It can print at 100/150 mm/s maximum by using Fujitsu's unique head drive control. * AutoCutter Long life and high reliable guilotine with dedicated motor. * Easypapersetting Our lever platen release mechanism allows a wide paper route, so paper can be easily inserted. Conventional auto loading is also available. * Multifunctionaldie-castframe Wide operating temperature range, long continuous printing, high ESD absorbtion and discharge of static electricity vibration and shock resistant. * RoHScompliant
FTP-637MCL401/601
FTP-637DSL291
FTP-637MCL401/601
n PARTNUMbERS
Part Number Easy Load Model with low profile cutter LSI for driving Interface board for Mech/Cutter Interface cables Power cables Cutter MCL401 MCL601 Parallel (Centronics) Serial (RS232C) USB Logic Head, motor FTP-637MCL401 FTP-637MCL601 FTP-627CU301R FTP-637DSL291R Parallel (Centronics) /Serial (RS-232C) FTP-637DSL603R (USB) FTP-637DSL605R Serial (RS-232C) FTP-628Y202 FTP-628Y302 FTP-629Y301 FTP-629Y401 FTP-629Y601
nSPECiFiCATiONS
Item Part number Printing method Dot structure Dot pitch (Horizontal) Dot pitch (Vertical) Effective printing area Number of columns Paper width Paper thickness Printing Speed Character types MCL401 MCL601 FTP-637MCL401/601 Thermal-line dot method 576 dots/line 0.125 mm (8 dots/mm)--Dot density 0.125 mm (8 dots/mm)--Line feed pitch 72 mm ANK 48 columns/line (maximum 12 x 24 dot font) 80 mm 60 to 100 m (some paper in this range may not be used because of paper characteristics) Maximum 100mm/sec. (800 dot line/sec.) Maximum 150mm/sec. (1,200 dot line/sec.) Alphanumeric, kana: International characters: JIS Kanji (Kanji CG loaded board): 2 x 24 dots, (1.5 x 3.0 mm), 48 columns: ANK 24 x 24 dots, (3.0 x 3.0 mm), 24 columns: ANK 8 x 16 dots, (1.0 x 2.0 mm), 72 columns: ANK 6 x 16 dots, (2.0 x 2.0 mm), 36 columns: ANK 159 types 195 types about 6800 types Specifications
Character, dimensions (WxH), number of columns
2
FTP-637MCL401/601
nSPECiFiCATiONS
Item Iterface Power supply For print head For motor For cutter For logic Dimensions Mechanism with cutter Interface board Weight Life DSL291 DSL60x Specification Conforms to RS232C/Centronics 24 VDC average current, 0.51A (1.17A peak) (print ratio: 12.5%, print speed 100mm/sec.) 24 VDC 5%, 1.1 A maximum 24 VDC 5%, 1.4 A maximum 5 VDC, 0.2 A maximum 104.5 x 42.2 x 21.8 mm (WxDxH) 70 x 60 x 12 mm (WxDxH) 95 x 70 x 12 mm (WxDxH) Approximately 116g/124g Approximately 25g / 34g Pulse durability: 100 million pulses/dot (print ratio: 12.5% or less). MCL401 MCL601 Cutter Platen Operating environment Operating temperature* Operating humidity Storage temperature Storage humidity Detection function Head temperature detection Paper out/mark detection Platen release Recommended thermal sensitive paper MCL401 MCL601 Abrasion resistance: Abrasion resistance: 500,000 cuts 1,000,000 cuts 5,000 times (open/close) 0C to +50C 20 to 85% RH (no condensation) -20C to +60C (paper not included) 5 to 95% RH (no condensation) Detected by thermistor Detected by photo-interruptor Detected by sliding switch High sensitive paper Standard paper TF50KS-E4 (Nippon paper) TF60KS-E (Nippon paper), FTP-020PU001 (58mm) PD150R (Oji paper) FTP-020PU701 (58mm) TF60KS-F1 (Nippon paper) FTP-020P0102 (58mm) PD170R (Oji paper) P220VBB-1 (Mitsubishi paper) PD160R (Oji paper) AFP-235 (Mitsubishi paper) TP50KJ-R (Nippon paper) HA220AA (Nippon paper) paper traveling distance 50km paper feed length 100km.
Mechanism with cutter Interface board Head
Medium life paper
Long life paper
*+5C to +40C printing density assurance rance.
3
FTP-637MCL401/601
n FUNCTiONOFiNTERFACEbOARd
Item 1. 2. 3. 4. 5. 6. 7. Test print function Paper out detection Paper near end detection Paten open detection Thermal head temperature abnormality detection Blow-out fuse detection Head voltage abnormality detection 8. 9. 10. 11. 12. 13. 14. Item Cutter trouble detect Motor power saving function Mark detection function MCU operation abnormality detection Power ON/OFF sequence protection Motor over-current protection Hardware timer
n diMENSiONS
1.Printermechanism FTP-637MCL401/601
Center of paper
90.4 36.0
13.9 (14.4 max.) 22.1 13.1
(42.2)
.6
7.5
Center of mechanism
27.7 28.3 (29.3 max.)
10.7
5.4
103.2 / 104.5
21.8
55
1.6
degrees
Note: 1. Dimensions are nominal value (tolerance 5 unless otherwise specified). 2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is open.
Unit: mm
4
FTP-637MCL401/601
2.interfaceboardFTP-637dSL291R
(70.0) 3.25 50.5 25.5 63.5 3.25
4.0
1.0
1.45
30
CN9
2
8
(60.0)
53.5 42.0
CN8
CN10
3.25
2.25
CN2
3 8
6
3.25
17.5 34.5 49.5
1.25
7
3
Note: all dimensions are nominal value () means just reference The mounting height is the max.
Unit: mm
1.6
13.5
1.2
FGO3.2 CN7
3-O3.2
2
CN6
30
29
5
FTP-637MCL401/601
n iNTERFACEbOARdFTP-637dSL601Series
ConnectorsonControlboard
Name CN2 CN4 RS-232C CN5 Cutter connector CN6 Operation panel connector CN7 Near end sensor connector CN8 CN9 Logic power connector CN10 Head/motor connector Note: *1: Option *2: Depends on specification Functions Connection for USB interface Connection for serial interface Connection for paper cutter Connection for operation panel Connection for near end switch Connection for +5V power Supply Connection for thermal head & paper feed motor 2-inch, 24 pin * *2 Remarks Note CN +24V power supply connector Connection for +24V power supply CN3 USB I/F connector
6
FTP-637MCL401/601
1.Connector(FPC)specification(CN4)
(1) Connector Mechanical unit side: FPC connector Remote side (housing site): 52610-3071 (made by Molex) (2) Pin assignment on the mechanical side No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Signal PH K VSEN PH E VH VH VH DI STB3 STB4 VDD GN D GN D GN D GN D GN D GN D TM STB1 STB2 LA T CL K VH VH VH SW SW MT/A MT/A MT/B MT/B I/O -- I O I I I I I I I -- -- -- -- -- -- O I I I I I I I -- -- I I I I Contents Photointerrupter (Cathode) Ground power supply for paper sensor Photointerrupter (Emittor) Head drive power Head drive power Head drive power Data input Strobe 3 Strobe 4 Logic Power Head ground Head ground Head ground Head drive power Head drive power Head drive power Thermistor Strobe 1 Strobe 2 Data Latch Clock Head drive power Head drive power Head drive power Platen open switch Platen open switch Motor excite signal A Motor excite signal A Motor excite signal B Motor excite signal B
7
FTP-637MCL401/601
Sensor (Photointerruptor) Platen unit Thermal head Motor
FPC Connect terminal: surface side Connector No 30, 29, .....................2,1 (FPC pin numbers)
2.Cutter(CN5)
Connector on control circuit side: 52610-0871 Molex or equivalent No. Signal 1 3 5 7 VSEN PH K MT/A MT/B I/ O I O I I Contents Paper sensor power Photo interruptor (cathode) Motor excite signal A Motor excite signal B No . 2 4 6 8 Signal PHE MT/A MT/B NC I/O O I I -- Contents Photo interruptor (emittor) Motor excite signal A Motor excite signal B Not connected
FujitsuComponentsinternationalHeadquarterOffices
Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com NorthandSouthAmerica Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/printers/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ AsiaPacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/
(c)2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. August 8, 2007
8

▲Up To Search▲

Price & Availability of FTP-637MCL601

	To Download FTP-637MCL601 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .